Technical Short Facts

- 3 cartridge plug-in positions
- 1 for pressure/humidity
- 2 for two various gas cartridges
- Variable connections and data output options
- Light but robust plastic housing
- Cartridges for CO2, O2, CH4 and H2 available now

BlueVary consists of a basis station with three plug-in positions for gas sensor cartridges. Two different gases can be measured at once. The third plug-in position holds a pressure or pressure/humidity sensor cartridge. Gas sensor cartridges are selectable according to your application and can be changed easily as required.
BlueVary increases your efficiency
- one device to cover different measurement tasks ➔ choose a suitable gas sensor cartridge for your application
- maintenance free ➔ no need for offsite annual maintenance - minimizes your downtime
- auto compensated pressure and/or humidity ➔ no gas cooler, pumps, valves or other gas pretreatment needed
- connectable to any hose/tube or pipe ➔ use it on your fermenter of choice
- integrated status display ➔ see all sensor information and measurement data at a glance
Simplify process optimization
- continuous online fermentation monitoring for cell culture, microbial, algae, fungi or biogas processes
- identify metabolic phenomena and obtain vital process parameters
- applicable from lab to industrial scale
Product-Video
Comparison BlueInOne vs. BlueVary
BlueInOne | BlueVary | |
housing | stainless steel | Polycarbonate |
annual maintenance needed | yes | no |
gases to be measured | combination O2, CO2 | various combinations O2, CO2, H2, CH4 |
different combinations possible for flexible usage | no | yes |
integrated display to see measurement and sensor data at a glance | no | yes |
various connections to connect to every fermenter | yes | yes |
application in projects with different measurement ranges | calibration has to be changed (if possible) | choose another cartridge |
one-point calibration to ensure higher accuracy | yes | yes |
possible to combine with BlueVis software for higher automation grade | yes | yes |
suitable for biogas applications | no | yes |

Don't waste budget and "Use what you have"
Before you go and buy something new: check your lab! It might be enough to just buy several new components. We can show you how to turn your older equipment into a modern, fully equipped and controlled system.
Go and check your lab cabinets for
- an (older) culture vessel, bioreactor or fermenter
- pH, pO2 probes
- agitator control
- digital mass flow controller or flow meter
- pumps for feed addition and pH control
- open software BlueVis 4.0
- off-gas analyzers suitable for your application
Do you already have some of these items? — Perfect! With open bioprocess software BlueVIS we will connect all components and make your system run. Various communication protocols already have been integrated in BlueVIS. If yours is not supported yet, we will realize it.
Use what you have — Think sustainable and keep your invest low
- Don't waste money on installation fees or trainings
- Use equipment from manufacturers that you want to and not that you're told to
- BlueVIS 4.0 is compatible with other process-control software via OPC

Benefit from continuous off-gas data
See what´s happening when it´s happening. MS and off-gass analyzers - it doesn´t have to be either or but can also be complementary. Read here why and how to benefit from continuous off gas measurement made by BlueSens although you already might have a mass spec.