Join our next webinars:

BlueVIS Masterclass

Chapter 2.1 Custom Modbus Configuration
Apr 18 - Apr 18, 2024
11:30 am (CET – German time)

Join for free

BlueVIS Masterclass

Chapter 2.2 Optimizing with FPP1 & FSM1
Apr 23 - Apr 23, 2024
11:30 am (CET – German time)

Join for free

BlueVIS software

BlueVis offers a very simple way to control and monitor you process. With it´s open structure it enables to connect exsisting hardware independent from manufacturer or brand. You are free to decide which brands you want to use. 

  • Operating system Windows 10 64 bit or newer
  • Modern processor with at least 4 cores and > 2.6 Ghz
  • Hard disk: SSD recommended with at least 50GB free space (> 200MB/s data access)
  • 8GB RAM
  • Display >= 1920x1080 px (FHD)

With BlueVIS you can read and control sensors, actuators etc. from different manufacturers. In addition BlueVIS offers pre-installed soft sensors (for OUR, CER, and RQ) and native RS-485 support. BlueVIS also offers the opportunity to run older already existing sensors and acutators so you don´t need to buy everything new. 

Yes, there is a 32 bit version with less functions, but we advice to use the 64 bit version. 

This message occurs when there is an error with USB connection and/or Windows energy manager. Please check USB cable. Always use an active USB Hub and connect the power supply delivered with the hub. Remember to switch off all options in Windows energy manager deactivating parts of your PC (especially hard drive and USB) when it´s not in use. 

The standard login credentials are:

Login: admin

Password: admin

This can be changed in the User configuration.