Our website uses cookies to improve the user experience. By continuing to use this website, you also are accepting our privacy policy. Further information

BlueVCount: High quality gas volume measurement: professional and precise

BlueVCount gas volume measurement

What is it for?

BlueVCount measures gas volumes in reactions of all kind. It is applicable for fermentations, degradation studies, substrate comparison studies, wastewater treatment, bioethanol or hydrogen production and is especially helpful in bio methane potential (BMP) determinations in industry and academia. Gas volume measurement delivers important information about the process and helps to optimize yields and process procedures.

How does it work?

BlueVCount is a volume measuring unit with a 1 ml cylinder that is equipped with an oil (special) sealed magnetic piston. It counts how often 1 ml gas comes through the cylinder and reports it to the integrated display or via Modbus RTU to a software (e.g. BlueVIS). To achieve this you do not need a minimum flow.

Your demands

  BlueVCount Gas
Endeavour*
Milligas-
counter**
Minimum flow No need ≥ 2(9)ml/min 1ml/h
Maximum flow 80ml/min 24(110)ml/min 20ml/min
Accuracy ±2% n.a. ±3%
Resolution 1ml 2(9)ml 3ml
Absorber possible yes yes yes
Limit of data logging unlimited 2x104 unlimited
Ethernet interface no yes no
Modbus (RS485) yes no no
Single device available yes no yes
Gas tank/bag connectable yes yes yes
Auto-compensation of humidity, pressure, temperature to display lN yes yes no

* BioProcessControl AB
** Dr.-Ing. RITTER Apparatebau GmbH & Co.KG

Technical Facts

  BlueVCount
Minimal volume flow 0 ml/h
Max. volume flow 4.800 ml/h
Mechanical protection up to 12.000 ml/h
Resolution (standard volume) 1 ml
Deviation from value ±2%
Gas pressure needed >3hPa
Working voltage 24V
Data format Modbus RTU
Baud rate 38400
Physical interface RS485

BlueVCount at a glance

  • More process information for a better process understanding
  • Leads to less number of experiments and optimized yields
  • No water or oil refill necessary
  • Shows normalized volume because of integrated pressure and temperature sensors
  • Integrated display for data information at any time
  • Combinable devices (daisy chain) for less cable tangle
  • BlueVIS ready via Modbus RTU for higher grade of automation

Application

Login